In-game Functions: Difference between revisions

From Melvor Idle
(→‎unlockPet: Add section)
m (Replace all getObjectByID with getObjectSafe to prevent entering invalid IDs)
 
(48 intermediate revisions by 7 users not shown)
Line 1: Line 1:
{{V|1.0.1}}
{{UserContentVersion|1.3}}
In-game functions are responsible for most things in the game. It is possible to interact directly with them through the console. This can be used to add items, levels, GP and more. These functions can be executed though the console. To access the console open Developer Tools (usually by pressing F12) in your browser and navigate to the console. Then, simply paste the code in the input field and press enter. Most functions will require you to fill out variables in the code before executing them. Note that all code is case sensitive.
In-game functions are responsible for most things in the game. It is possible to interact directly with them through the console. This can be used to add items, levels, GP and more. These functions can be executed though the console. To access the console open Developer Tools (usually by pressing F12) in your browser and navigate to the console. Then, simply paste the code in the input field and press enter. Most functions will require you to fill out variables in the code before executing them. Note that all code is case sensitive.


'''Disclaimer:''' Blindly adding items and experience will most likely take away game enjoyment. It is highly encouraged only to use this to either test things or recoup lost items/progress due to lost saves.
'''Disclaimer:''' Blindly adding items and experience will most likely take away game enjoyment. It is highly encouraged only to use this to either test things or recoup lost items/progress due to lost saves.


'''Disclaimer:''' You are playing around with the code of the game if you make mistakes, it is possible that could corrupt your game. It is highly recommended to '''BACKUP YOUR SAVE''' before running any in-game functions.
{{Disclaimer|You are playing around with the code of the game, as such if you make mistakes it is possible that could corrupt your game. It is highly recommended to '''BACKUP YOUR SAVE''' before running any in-game functions.}}


==Using In-game Functions On Steam==
<div class="toclimit-ex">__TOC__</div>
Players should refer to the [[Scripting and Extensions Instructions#Steam Console and Scripts|Scirpting and Extensions Instructions]] page for a step-by-step guide on using these functions with the Steam version of Melvor Idle.


== addItemToBank ==
==Using In-game Functions==
The addItemToBank function can be used to add any item in the game to the bank.
Players can use the [https://mod.io/g/melvoridle/m/devconsole dev.Console mod] to execute these functions within the Steam, Epic, Android, and iOS versions of Melvor Idle.
<nowiki>addItemToBank(itemID, quantity, found, showNotification, ignoreBankSpace)</nowiki>
 
On Web, Steam, and Epic, the console can be opened with F12. If using Steam or Epic, you must [[Mod_Creation/Enabling_DevTools_for_the_Steam_and_Epic_Clients|enable the dev console first]] before you are able to open it.
 
== Add Item to Bank ==
The <code>addItemByID</code> function can be used to add any item in the game to the bank.
<syntaxhighlight lang="js">game.bank.addItemByID(itemID, quantity, logLost, found, ignoreSpace, notify)</syntaxhighlight>


=== Attributes ===
=== Attributes ===
Line 18: Line 22:
! Attribute !! Type !! Optional? !! Default Value !! Description
! Attribute !! Type !! Optional? !! Default Value !! Description
|-
|-
| itemID || int || No || || The ID of the item.<br />For a complete list of items and their IDs, see: [[Table of Items]]
| itemID || string || No || || The ID of the item.
 
For a complete list of items, see: [[Table of Items]]. Item IDs are on their respective wiki page.
 
To search for a specific item by name, the following can be used. Replace <code>REPLACEME</code> with the full or partial name of the item (case insensitive).
<syntaxhighlight lang="js">
let searchTerm = 'REPLACEME';
console.log(game.items.filter(x => x.name.toLowerCase().includes(searchTerm.toLowerCase())).map((a) => a.id + ' - ' + a.name).join('\n'))
</syntaxhighlight>
|-
| quantity || int || No || || Quantity of item to add.
|-
|-
| quantity || int || No || || Quantity of item to add. Will remove items from the bank if a negative value is specified
| logLost || boolean || Yes || false || If <code>true</code>, items that did not fit into the bank will be logged as lost
|-
|-
| found || boolean || Yes || true || Determines if it will show in item completion log
| found || boolean || Yes || false || Determines if items added by this function will be included within the "Times Found" statistic for that item within the completion log. Therefore, unless this parameter is set to <code>true</code>, any items added in this way will not contribute towards the player's item completion percentage.
<br/><br/>{{Disclaimer|'''Note:''' When adding {{ItemIcon|Bank Slot Token|Bank Slot Tokens}}, it is suggested that this parameter is set to <code>true</code>, otherwise this may cause issues with the way the game calculates the amount of bank space a player has.}}
|-
|-
| showNotification || boolean || Yes || true || Determines if it will show notification
| ignoreSpace || boolean || Yes || false || If <code>true</code>, the item will be added to the bank even if the bank is already full
|-
|-
| ignoreBankSpace || boolean || Yes || false || If <code>true</code>, the item will be added to the bank even if the bank is already full
| notify || boolean || Yes || true || If <code>true</code>, there will be a notification that the item was added along with the quantity.
|}
|}


=== Examples ===
=== Examples ===
<nowiki>addItemToBank(1, 10, false);</nowiki>
<syntaxhighlight lang="js">game.bank.addItemByID("melvorD:Oak_Logs", 10, true, true, false);</syntaxhighlight>
The above code will result in 10 items with item ID 1 (Oak Logs) being added to the Bank without them appearing in the item completion log, but with notification.
The above code will result in attempting to add 10 {{ItemIcon|Oak Logs}} to the Bank. If they do not fit, 10 will be added to the # of Oak Logs lost on the item's stats. Additionally, Oak Logs will be marked as discovered in the Completion Log.
<syntaxhighlight lang="js">game.items.forEach((item) => game.bank.addItem(item, 1000000, false, true, true, false));</syntaxhighlight>
The above code will add 1,000,000 of every item in the game. The items will be forced into the bank even if you do not have room and there will be no notifications upon adding the items.
 
== Remove Item from Bank ==
The <code>removeItemQuantityByID</code> function can be used to remove any item from the bank
<syntaxhighlight lang="js">game.bank.removeItemQuantityByID(itemID, quantity, removeItemCharges)</syntaxhighlight>


== removeItemFromBank ==
Note that if an item's quantity is in an invalid state, such as <syntaxhighlight lang="js" inline>NaN</syntaxhighlight> or <syntaxhighlight lang="js" inline>Infinity</syntaxhighlight>, then this function will not be able to remove that item from the bank. For any such items, use the below snippet instead:
The removeItemFromBank function can be used to remove any item from the bank
{{SpoilerBox
<nowiki>removeItemFromBank(itemID, deactiveGloves)</nowiki>
|color=default
|title=Code
|text=First, enter the below into the console:
<syntaxhighlight lang="js">function removeItemByID(itemID) {
const item = game.items.getObjectSafe(itemID);
const bankItem = game.bank.items.get(item);
if (bankItem === undefined)
throw new Error(
`Tried to remove quantity from bank, but item is not in bank.`
);
bankItem.quantity = 1;
game.bank.removeItemQuantity(item, 1, true);
}</syntaxhighlight>
After this, invoke the newly-created function with the appropriate item ID to remove items from the bank. For example: <syntaxhighlight lang="js" inline>removeItemByID('melvorD:Oak_Logs');</syntaxhighlight>
}}


=== Attributes ===
=== Attributes ===
Line 42: Line 77:
! Attribute !! Type !! Optional? !! Default Value !! Description
! Attribute !! Type !! Optional? !! Default Value !! Description
|-
|-
| itemID || int || No || || The ID of the item.<br />For a complete list of items and their IDs, see: [[Table of Items]]
| itemID || string || No || || The ID of the item.<br />For a complete list of items and their IDs, see: [[Table of Items]]
|-
| quantity || int || No || || The number of items to remove.
|-
|-
| deactiveGloves || boolean || Yes || true || If <code>true</code>, the count of glove charges will be set to 0 if the itemID is for a gloves with charges.
| removeItemCharges || boolean || Yes || true || If <code>true</code>, the count of glove charges will be set to 0 if the itemID is for a pair of gloves with charges.
|}
|}


=== Examples ===
=== Examples ===
<nowiki>removeItemFromBank(1);</nowiki>
<syntaxhighlight lang="js">game.bank.removeItemQuantityByID('melvorD:Oak_Logs', 10);</syntaxhighlight>
The above code will result in item ID 1 (Oak Logs) being removed from the bank.
The above code will result in 10 {{ItemIcon|Oak Logs}} being removed from the bank.
 
== Adjust Shop Purchases ==
The below script will add a shop purchase into <code>upgradesPurchased</code> which is where all purchases are stored. Alternatively, <code>game.shop.buyItemOnClick(purchase, true);</code> can be used however using this function will remove the costs of the purchase as well.


== player.addGP ==
The player.addGP function can be used to add gp to a player.
<nowiki>player.addGP(amount, source)</nowiki>
=== Attributes ===
=== Attributes ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Attribute !! Type !! Optional? !! Default Value !! Description
! Attribute !! Type !! Optional? !! Description
|-
|-
| amount|| int || No || || The quantity of GP to add
| purchaseID || string || No || The ID of the Purchase. A complete list of purchase IDs can be generated with: <syntaxhighlight lang="js" inline>console.log(game.shop.purchases.allObjects.map((a) => a.id + ' - ' + a.name).join('\n'))</syntaxhighlight>
 
To search for a specific purchase by name, the following can be used. Replace <code>REPLACEME</code> with the full or partial name of the purchase (case insensitive).
<syntaxhighlight lang="js">
let searchTerm = 'REPLACEME';
console.log(game.shop.purchases.filter(x => x.name.toLowerCase().includes(searchTerm.toLowerCase())).map((a) => a.id + ' - ' + a.name).join('\n'))
</syntaxhighlight>
|-
|-
| source || string || No || || The source of the GP being added. If set to "Combat" it will add the gp to the players gp received in combat stat for tracking.
| quantity || int || No || The number of purchases to buy
|}
|}
=== Examples ===
<nowiki>player.addGP(1,"");</nowiki>
The above code will add 1 gp to the player, and not place the info into the players stats for tracking.
<nowiki>player.addGP(1,"Combat");</nowiki>
The above code will add 1 gp to the player, and place the info into the players stats for tracking.


== player.removeGP ==
==== Examples ====
The player.removeGP function can be used to remove gp from a player.
<syntaxhighlight lang="js">
<nowiki>player.removeGP(amount)</nowiki>
// Settings //
=== Attributes ===
let purchase = game.shop.purchases.getObjectSafe('melvorD:Extra_Bank_Slot');
let quantity = 100;
// End of Settings //
game.shop.upgradesPurchased.set(purchase, (game.shop.upgradesPurchased.get(purchase) || 0) + quantity);
game.shop.computeProvidedStats();
shopMenu.tabs.get(purchase.category).menu.updateItemSelection();
game.shop.renderQueue.costs = true;
</syntaxhighlight>
The above will add 100 Bank Slot purchases then do the necessary render.
 
== Adjust Currencies ==
All [[Currency|Currencies]] within the game, being {{GP}} [[GP]], {{AP}} [[Abyssal Pieces]] (AP), {{SC}} [[Slayer Coins]] (SC), {{ASC}} [[Abyssal Slayer Coins]] (ASC), and {{RC}} [[Raid Coins]] (RC) can be adjusted using the same set of functions:
* To adjust GP, use <syntaxhighlight lang="js" inline>game.gp</syntaxhighlight>
* To adjust AP, use <syntaxhighlight lang="js" inline>game.abyssalPieces</syntaxhighlight>
* To adjust SC, use <syntaxhighlight lang="js" inline>game.slayerCoins</syntaxhighlight>
* To adjust ASC, use <syntaxhighlight lang="js" inline>game.abyssalSlayerCoins</syntaxhighlight>
* To adjust RC, use <syntaxhighlight lang="js" inline>game.raidCoins</syntaxhighlight>
 
The following functions are used to add, remove, and set currencies. <code>set</code> may be of particular use to players who have inadvertently found their currency balance is set to an invalid value such as <code>NaN</code>.
<syntaxhighlight lang="js">
game.<currency>.add(amount);
game.<currency>.remove(amount);
game.<currency>.set(amount);
</syntaxhighlight>
 
==== Attributes ====
{| class="wikitable"
{| class="wikitable"
|-
|-
! Attribute !! Type !! Optional? !! Default Value !! Description
! Attribute !! Type !! Optional? !! Description
|-
|-
| amount|| int || No || || The quantity of GP to remove
| amount || int || No || The amount to adjust the specified currency's balance by
|}
|}
=== Examples ===
<nowiki>player.removeGP(1);</nowiki>
The above code will remove 1 gp from the player.


== player.addPrayerPoints ==
==== Examples ====
The player.addPrayerPoints function can be used to add prayer points to a player.
<syntaxhighlight lang="js">
<nowiki>player.addPrayerPoints(amount)</nowiki>
game.gp.add(1000);
game.abyssalSlayerCoins.remove(2500);
game.raidCoins.set(10000);
</syntaxhighlight>
The first function will add {{GP|1000}}, the second function will remove {{ASC|2500}} and lastly, the third function will set the balance of {{RC}} [[Raid Coins]] to 10,000.
 
== Adjust Prayer Points or Soul Points ==
The <code>addPrayerPoints</code> and <code>addSoulPoints</code> functions can be used to add prayer points or soul points to a player.
<syntaxhighlight lang="js">
game.combat.player.addPrayerPoints(amount);
game.combat.player.addSoulPoints(amount);
</syntaxhighlight>
=== Attributes ===
=== Attributes ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Attribute !! Type !! Optional? !! Default Value !! Description
! Attribute !! Type !! Optional? !! Description
|-
|-
| amount|| int || No || || The quantity of prayer points to add.
| amount || int || No || The quantity of prayer or soul points to add. A negative value will remove points.
|}
|}
=== Examples ===
=== Examples ===
<nowiki>player.addPrayerPoints(1);</nowiki>
<syntaxhighlight lang="js">
The above code will add 1 prayer point to the player, and update player stats.
game.combat.player.addPrayerPoints(1);
game.combat.player.addSoulPoints(-50);
</syntaxhighlight>
The first line will add 1 prayer point to the player while the second will remove 50 soul points.


== player.addSlayerCoins ==
== Adjust XP and Abyssal XP ==
The player.addSlayerCoins function can be used to add slayer coins to a player.
The <code>addXP</code> and <code>addAbyssalXP</code> functions can be used to add or remove experience and abyssal experience from any skill. The <code>setXP</code> and <code>setAbyssalXP</code> can be used to set the new experience or abyssal experience value.
<nowiki>player.addSlayerCoins(amount)</nowiki>
<syntaxhighlight lang="js">
game.<skill>.addXP(xp);
game.<skill>.addAbyssalXP(xp);
game.<skill>.setXP(xp);
game.<skill>.setAbyssalXP(xp);
</syntaxhighlight>
where <code><skill></code> is the lowercase name of the skill you are adding experience to.
=== Attributes ===
=== Attributes ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Attribute !! Type !! Optional? !! Default Value !! Description
! Attribute !! Type !! Optional? !! Description
|-
|-
| amount|| int || No || || The quantity of slayer coins to add.
| xp || int || No || Amount of experience to add. A negative number will remove experience. When removing XP, it's best to use the Set function as these will also visually update your current level if the removed experience results in a lower level.
|}
|}
=== Examples ===
=== Examples ===
<nowiki>player.addSlayerCoins(1);</nowiki>
<syntaxhighlight lang="js">
The above code will add 1 slayer coin to the player, and update player stats.
game.thieving.addXP(1000);
game.astrology.setAbyssalXP(game.astrology.abyssalXP - 700); // For XP, use game.astrology.xp with the addXP function
game.attack.setXP(exp.levelToXP(120) + 1); // For Abyssal XP, use abyssalExp.levelToXP with the setAbyssalXP function
</syntaxhighlight>
The first line will result in 1,000 experience being added to {{Skill|Thieving}}. The second line will remove 700 abyssal xp from Astrology. The third line will set Attack's level to 120.


== player.addXP ==
== Adjust Mastery XP ==
The player.addXP function can be used to add experience to any skill. Note that the game will not visually show the updated XP until after refresh or 1 new action.
The <code>addMasteryXP</code> function can be used to add experience to any specific {{Icon|Mastery}} in a skill.
<nowiki>player.addXP(skillID, xp)</nowiki>
<syntaxhighlight lang="js">game.<skill>.addMasteryXP(masteryAction, xp)</syntaxhighlight>
where <code><skill></code> is the lowercase name of the skill you are adding mastery experience to.
=== Attributes ===
=== Attributes ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Attribute !! Type !! Optional? !! Default Value !! Description
! Attribute !! Type !! Optional? !! Description
|-
|-
| skillID || int || No || || The ID of the skill, see: [[#Skill ID|Skill ID]]
| masteryAction || object || No || The action to add Mastery XP to. Obtained with <syntaxhighlight lang="js" inline>game.<skill>.actions.getObjectSafe(id);</syntaxhighlight>.
 
A list of actions IDs can be generated with <syntaxhighlight lang="js" inline>console.log(game.<skill>.actions.allObjects.map((a) => a.id + ' - ' + a.name).join('\n'));</syntaxhighlight>
 
In both of the provided functions, <code><skill></code> must be replaced with the name of the skill (all lowercase).
|-
|-
| xp || int || No || || Amount of experience to add. Note that this is the amount of experience added before bonuses such as that from the {{ItemIcon|Firemaking Skillcape}} or {{PetIcon|Pyro}}
| xp || int || Yes || Amount of experience to add. A negative value will remove mastery xp.
|}
|}
=== Examples ===
=== Examples ===
<nowiki>player.addXP(10, 1000);</nowiki>
<syntaxhighlight lang="js">
The above code will result in 1000 experience being added to the skill with ID 10 (Thieving).
game.farming.addMasteryXP(game.farming.actions.getObjectSafe('melvorD:Carrot'), 300);
game.farming.addMasteryXP(game.farming.actions.getObjectSafe('melvorTotH:Starfruit'), -500);
</syntaxhighlight>
The first line will result in 300 {{Icon|Mastery}} XP being added to {{Skill|Farming}} for {{ItemIcon|Carrot Seeds}} whereas the second line will remove 500 Mastery XP from {{ItemIcon|Starfruit}}.


== addMasteryXP ==
<syntaxhighlight lang="js">game.masterySkills.forEach(skill => skill.actions.forEach(action => skill.addMasteryXP(action, 5000)));</syntaxhighlight>
The addMasteryXP function can be used to add experience to any specific Mastery in a skill. Note that the game will not visually show the updated Masterry experience until after refresh or 1 new action.  
The above code will result in 5,000 {{Icon|Mastery}} XP being added to every action within every skill with a mastery action.
<nowiki>addMasteryXP(skillID, masteryID, timePerAction, spendingXP, xp, addToPool, offline)</nowiki>
 
== Adjust Mastery Pool XP ==
The <code>addMasteryPoolXP</code> function can be used to add [[Mastery#The_Mastery_Pool|Mastery Pool]] experience to a skill
<syntaxhighlight lang="js">game.<skill>.addMasteryPoolXP(realm, xp)</syntaxhighlight>
where <code><skill></code> is the lowercase name of the skill you are adding mastery experience to.
=== Attributes ===
=== Attributes ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Attribute !! Type !! Optional? !! Default Value !! Description
! Attribute !! Type !! Optional? !! Description
|-
|-
| skillID || int || No || || The ID of the skill, see: [[#Skill ID|Skill ID]]
| realm || object || No || The realm to add the Mastery Pool XP to. Obtained with <code>game.realms.getObjectSafe(realmID)</code>.
 
A list of realm IDs can be obtained by entering the following into the console: <code>console.log(game.realms.allObjects.map((a) => a.id + ' - ' + a.name).join('\n'))</code>.
|-
|-
| masteryID || int || No || || The skill specific Mastery ID. See [[#Mastery IDs|below]] for information on how to identify Mastery ID values
| xp || int || Yes || Amount of experience to add. A negative value will remove mastery pool xp.
|-
|}
| timePerAction || int || No || || The interval (in milliseconds) of the action granting mastery experience. Has no effect on the result if <code>spendingXP</code> is <code>true</code>
=== Examples ===
|-
<syntaxhighlight lang="js">
| spendingXP || boolean || Yes || false || <code>true</code>: The amount of experience specified with <code>xp</code> is added, <code>timePerAction</code> is ignored<br /><code>false</code>: The amount of experience added is determined by the [[Mastery#Earning Mastery XP|Mastery experience per action calculation]], <code>xp</code> is ignored
game.woodcutting.addMasteryPoolXP(game.realms.getObjectSafe('melvorD:Melvor'), 600);
game.woodcutting.addMasteryPoolXP(game.realms.getObjectSafe('melvorItA:Abyssal'), -400);
</syntaxhighlight>
The first line will result in 600 [[Mastery#The_Mastery_Pool|Mastery Pool]] XP being added to {{Skill|Woodcutting}} in the Melvor Realm whereas the second line will remove 400 mastery pool xp from Woodcutting in the abyssal realm.
 
<syntaxhighlight lang="js">game.realms.forEach(realm => game.masterySkills.forEach(skill => skill.addMasteryPoolXP(realm, 1000)));</syntaxhighlight>
The above code will result in 1,000 [[Mastery#The_Mastery_Pool|Mastery Pool]] XP being added to all skills in every realm.
 
== Unlock a Pet ==
The <code>unlockPetByID</code> function is used to unlock [[Pets]].
<syntaxhighlight lang="js">game.petManager.unlockPetByID(petID)</syntaxhighlight>
=== Attributes ===
{| class="wikitable"
|-
|-
| xp || int || Yes || 0 || Amount of experience to add. Has no effect on the result if <code>spendingXP</code> is <code>false</code>
! Attribute !! Type !! Optional? !! Description
|-
|-
| addToPool || boolean || Yes || true || Determines whether a portion of the specified experience amount is added to the mastery pool for the relevant skill or not
| petID || string || No || The ID of the pet, which can be found on the individual pet pages (such as {{PetIcon|Ty}} for example) or by using the following function: <code>console.log(game.pets.allObjects.map((a) => a.id + ' - ' + a.name).join('\n'))</code>
|-
| offline || boolean || Yes || false || Determines if various UI elements are immediately updated to reflect the experience gain. Should usually be left as the default value
|}
|}
=== Mastery IDs ===
=== Examples ===
Below is a reference of how the various mastery ID values may be identified.
<syntaxhighlight lang="js">
game.petManager.unlockPetByID('melvorD:CoolRock');
game.petManager.unlocked.delete(game.pets.getObjectSafe('melvorD:CoolRock'));game.petManager.computeProvidedStats();
</syntaxhighlight>
The first line will result in the unlocking of {{PetIcon|Cool Rock}} while the second line will remove the Cool Rock then reload the player's stats.
<syntaxhighlight lang="js">game.pets.forEach(pet => game.petManager.unlockPet(pet));</syntaxhighlight>
The above code will unlock every single pet.
 
== Discover Summoning Marks ==
The <code>discoverMark</code> function is used to discover [[Summoning#Summoning Marks|Summoning Marks]].
<syntaxhighlight lang="js">game.summoning.discoverMark(mark)</syntaxhighlight>
=== Attributes ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Skill !! Mastery ID
! Attribute !! Type !! Optional? !! Description
|-
|-
| {{Skill|Woodcutting}} || Index of the required tree within the constant <code>trees</code>
| mark || object || No || The mark to discover. Obtained with <syntaxhighlight lang="js" inline>game.summoning.actions.getObjectSafe(markID)</syntaxhighlight> where <code>markID</code> is the ID of the mark.
|-
 
| {{Skill|Thieving}} || Index of the required NPC within the constant <code>thievingNPC</code>
A list of mark IDs can be obtained by entering the following into the console: <syntaxhighlight lang="js" inline>console.log(game.summoning.actions.allObjects.map((a) => a.id + ' - ' + a.name).join('\n'))</syntaxhighlight>.
|-
| {{Skill|Farming}} || <code>items[itemID].masteryID[1]</code> replacing <code>itemID</code> with the ID of the planted seed
|-
| {{Skill|Fishing}} || rowspan="9" | <code>items[itemID].masteryID[1]</code>, replacing <code>itemID</code> with the ID of the item produced by the action
|-
| {{Skill|Firemaking}}
|-
| {{Skill|Cooking}}
|-
| {{Skill|Mining}}
|-
| {{Skill|Smithing}}
|-
| {{Skill|Fletching}}
|-
| {{Skill|Crafting}}
|-
| {{Skill|Runecrafting}}
|-
| {{Skill|Herblore}}
|}
|}


=== Examples ===
=== Examples ===
  <nowiki>addMasteryXP(11, 13, 0, true, 300);</nowiki>
<syntaxhighlight lang="js">
The above code will result in 300 Mastery XP being added to the skill with ID 11 (Farming) for Mastery ID 13 (Carrot Seeds).
game.summoning.discoverMark(game.summoning.actions.getObjectSafe('melvorF:Dragon'));
game.summoning.marksUnlocked.delete(game.summoning.actions.getObjectSafe('melvorF:Dragon'));
  </syntaxhighlight>
The first line discovers a single mark for the {{ItemIcon|Dragon}} familiar whereas the second line removes all marks from the Dragon.
<syntaxhighlight lang="js">
game.summoning.actions.forEach((mark) => {
game.summoning.marksUnlocked.set(mark, (mark.realm.id === 'melvorD:Melvor') ? 61 : 31);
game.summoning.renderQueue.markCount.add(mark);
game.summoning.renderQueue.markState.add(mark);
});
</syntaxhighlight>
The above code will set every single mark to level 61 if it's in the Melvor Realm and 31 if it's in the Abyssal Realm then update the mark count and mark states.


<nowiki>addMasteryXP(2, 3, 3000);</nowiki>
== Locate an Ancient Relic ==
The above code will result in the calculation & addition of the amount of Mastery XP from an action in skill with ID 2 (Firemaking) for item with Mastery ID 3 (Teak Logs), supposing the action took 3,000 milliseconds.
The <code>locateAncientRelic</code> function is used to locate [[Ancient Relics#List_of_Ancient_Relics|Ancient Relics]].
<syntaxhighlight lang="js">game.<skill>.locateAncientRelic(relicSet, relic)</syntaxhighlight>


== addMasteryXPToPool ==
where <code><skill></code> is the lowercase name of the skill you wish to add a relic to.
The addMasteryXpToPool function can be used to add mastery pool experience to a skill
<nowiki>addMasteryXPToPool(skillID, xp, offline, token)</nowiki>
=== Attributes ===
=== Attributes ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Attribute !! Type !! Optional? !! Default Value !! Description
! Attribute !! Type !! Optional? !! Description
|-
|-
| skillID || int || No || || The ID of the skill, see: [[#Skill ID|Skill ID]]
| relicSet || object || No || The relicSet that the relic belongs to. Obtained with <syntaxhighlight lang="js" inline>game.<skill>.ancientRelicSets.get(realm)</syntaxhighlight>
 
A list of realms IDs can be obtained by entering the following into the console: <syntaxhighlight lang="js" inline>console.log(game.realms.allObjects.map((a) => a.id + ' - ' + a.name).join('\n'))</syntaxhighlight>. To convert the realmID into a realm object, use <syntaxhighlight lang="js" inline>game.realms.getObjectSafe(realmID)</syntaxhighlight>.
|-
|-
| xp || int || Yes || 0 || Amount of experience to add. One quarter of this value will be added if the player is under level 99 in that skill. One half of the value will be added if the player is level 99 in that skill.
| relic || object || No || The relic that you wish to add.
|-
 
| offline || boolean || Yes || false || Determines if various UI elements are immediately updated to reflect the experience gain. Should usually be left as the default value
The relic can be obtained with <code>relicSet.relicDrops[#].relic;</code> where <code>#</code> is replaced with the relic number, starting from 0 for the first relic and ending with 4 for the 5th relic.
|-
| token || boolean || Yes || false || Forces forces 100% of the <code>xp</code> value to be added to the pool, ignoring player's level within the skill.
|}
|}
=== Examples ===
<syntaxhighlight lang="js">
let realm = game.realms.getObjectSafe('melvorD:Melvor');
let relicSet = game.woodcutting.ancientRelicSets.get(realm);
let relic = relicSet.relicDrops[0].relic;
if (!relicSet.foundRelics.has(relic))
game.woodcutting.locateAncientRelic(relicSet, relic);
</syntaxhighlight>
The above code locates Woodcutting Relic 1 in the Melvor Realm.
<syntaxhighlight lang="js">
game.skills.forEach(skill => {
game.realms.forEach(realm => {
let relicSet = skill.ancientRelicSets.get(realm);
if (skill.hasAncientRelics && relicSet !== undefined)
relicSet.relicDrops.forEach(({ relic }) => {
if (!relicSet.foundRelics.has(relic))
skill.locateAncientRelic(relicSet, relic)
});
});
});
</syntaxhighlight>
The above will add all the ancient relics to every skill, including modded skills, for all realms that have relics.
== Reset all Equipment Quick Equip Items ==
The below script will reset the Equipment Quick Equip items back to an empty item. These are the Quick Equip items that are found when clicking on an equipment slot, not the ones found in the skilling minibar (that are set through the bank settings).
=== Examples ===
=== Examples ===
<nowiki>addMasteryXPToPool(11, 600);</nowiki>
<syntaxhighlight lang="js">
The above code will result in 150 Mastery Pool XP being added to the skill with ID 11 (Farming) if the player is under 99 in farming. Or 300 Mastery Pool XP being added if the player is over 99
game.combat.player.equipment.equippedArray.forEach(equipped => {
equipped.quickEquipItems = [game.emptyEquipmentItem, game.emptyEquipmentItem, game.emptyEquipmentItem];
equipped.trimQuickEquipItems();
});
</syntaxhighlight>
The above code will reset all the quick equip items for the '''current''' equipment set.
<syntaxhighlight lang="js">
game.combat.player.equipmentSets.forEach(({ equipment }) => {
equipment.equippedArray.forEach(equipped => {
equipped.quickEquipItems = [game.emptyEquipmentItem, game.emptyEquipmentItem, game.emptyEquipmentItem];
equipped.trimQuickEquipItems();
});
});
</syntaxhighlight>
The above code will reset all the quick equip items for '''all''' equipment sets.


== unlockPet ==
== Adjust Dungeon Completions ==
The unlockPet function is used to unlock [[Pets]]. Note that unlocking a pet is permanent - there is no supported method to lock a pet once again.
The <code>addDungeonCompletion</code> and <code>setDungeonCompleteCount</code> functions are used to modify a dungeon's completion count.
<nowiki>unlockPet(petID, offline)</nowiki>
<syntaxhighlight lang="js">
game.combat.player.manager.addDungeonCompletion(dungeon);
game.combat.player.manager.setDungeonCompleteCount(dungeon, amount);
</syntaxhighlight>
=== Attributes ===
=== Attributes ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Attribute !! Type !! Optional? !! Default Value !! Description
! Attribute !! Type !! Optional? !! Description
|-
|-
| petID || int || No || || The ID of the pet, which can be found on the individual pet pages (such as {{PetIcon|Ty}} for example).
| dungeon || object || No || The dungeon you wish to add a completion to. Obtained with <syntaxhighlight lang="js" inline>game.dungeons.getObjectSafe(dungeonID);</syntaxhighlight> where <code>dungeonID</code> is the ID of the dungeon.
 
A list of dungeon IDs can be obtained by entering the following into the console: <syntaxhighlight lang="js" inline>console.log(game.dungeons.allObjects.map((a) => a.id + ' - ' + a.name).join('\n'))</syntaxhighlight>.
 
If an invalid dungeonID is entered, your game will be unable to be saved until the entry is either removed or the game is reloaded. You can remove the undefined entry with <code>game.combat.player.manager.dungeonCompletion.delete(undefined)</code> which should return <code>true</code> and the errors should stop appearing.
|-
|-
| offline || boolean || Yes || false || Determines if various UI elements are immediately updated to reflect the experience gain. Should usually be left as the default value
| amount || number || No || The amount of dungeons clears you wish to add when using <code>setDungeonCompleteCount</code>. An amount is only required for setDungeonCompleteCount.
|}
|}
=== Examples ===
=== Examples ===
<nowiki>unlockPet(4);</nowiki>
<syntaxhighlight lang="js">
The above code will result in the unlocking of {{PetIcon|Cool Rock}}.
let dungeon = game.dungeons.getObjectSafe('melvorF:Into_the_Mist');
game.combat.player.manager.addDungeonCompletion(dungeon);


== Reference Tables ==
let dungeon = game.dungeons.getObjectSafe('melvorItA:Into_The_Abyss')
=== Skill ID ===
game.combat.player.manager.setDungeonCompleteCount(dungeon, 15);
{| class="wikitable sortable"
</syntaxhighlight>
|-
The first example will add a single completion to {{ZoneIcon|Into the Mist}} while the second example will set {{ZoneIcon|Into the Abyss}} completions to 15.
! ID !! Skill
 
|-
After modifying the dungeon completion count, run <code>game.queueRequirementRenders();</code> to apply UI updates without having to restart the game.
| 0 || {{Skill|Woodcutting}}
 
|-
== Ancient Relics Level Caps ==
| 1 || {{Skill|Fishing}}
=== Increasing or Setting level caps ===
|-
The <code>increaseLevelCap</code> and <code>setLevelCap</code> functions are used to modify the current level cap of a given skill in the {{AoD}} {{Icon|Ancient Relics}} [[gamemode]].
| 2 || {{Skill|Firemaking}}
<syntaxhighlight lang="js">
|-
game.<skill>.increaseLevelCap(value);
| 3 || {{Skill|Cooking}}
game.<skill>.setLevelCap(value);
|-
game.<skill>.increaseAbyssalLevelCap(value);
| 4 || {{Skill|Mining}}
game.<skill>.setAbyssalLevelCap(value);
|-
</syntaxhighlight>
| 5 || {{Skill|Smithing}}
 
|-
==== Attributes ====
| 6 || {{Skill|Attack}}
{| class="wikitable"
|-
| 7 || {{Skill|Strength}}
|-
| 8 || {{Skill|Defence}}
|-
| 9 || {{Skill|Hitpoints}}
|-
| 10 || {{Skill|Thieving}}
|-
| 11 || {{Skill|Farming}}
|-
| 12 || {{Skill|Ranged}}
|-
| 13 || {{Skill|Fletching}}
|-
| 14 || {{Skill|Crafting}}
|-
| 15 || {{Skill|Runecrafting}}
|-
|-
| 16 || {{Skill|Magic}}
! Attribute !! Type !! Optional? !! Description
|-
|-
| 17 || {{Skill|Prayer}}
| value || int || No || The value to increase the level cap by, or set the level cap to
|-
| 18 || {{Skill|Slayer}}
|-
| 19 || {{Skill|Herblore}}
|-
| 20 || {{Skill|Agility}}
|-
| 21 || {{Skill|Summoning}}
|-
|22 || {{Skill|Astrology}}
|}
|}
==== Examples ====
<syntaxhighlight lang="js">
game.slayer.increaseLevelCap(20);
game.thieving.setAbyssalLevelCap(45);
</syntaxhighlight>
The first line will increase {{Skill|Slayer|Slayer's}} level cap by 20 levels whereas the second line will set {{AbyssalSkill|Thieving|Thieving's}} level cap to 45.
<syntaxhighlight lang="js">
game.skills.forEach(skill => {
skill.setLevelCap(skill.maxLevelCap);
if (skill.hasAbyssalLevels)
skill.setAbyssalLevelCap(skill.maxAbyssalLevelCap);
});
</syntaxhighlight>
The above code will set both the level caps and abyssal level caps of all skills to their maximum value.
=== Awarding random level caps ===
The below script will award random level cap increases without increasing combat level caps. The only value that must be changed is the <code>capType</code> at the beginning of the script. 0 is a pre-Bane level cap increase, 2 is a TotH level cap increase, and 4 is an ItA level cap increase.
<syntaxhighlight lang="js">
let capType = 0; // 0 = pre-Bane, 2 = TotH, 4 = ItA
let capIncrease = game.currentGamemode.levelCapIncreases[capType];
game.validateRandomLevelCapIncreases();
if (capIncrease.randomIncreases.length > 0 && capIncrease.randomCount > 0) {
if (capIncrease.randomIncreasesLeft === 0)
game.levelCapIncreasesBeingSelected.push(capIncrease);
capIncrease.randomIncreasesLeft += capIncrease.randomCount;
game.renderQueue.sidebarSkillUnlock = true;
game.queueNextRandomLevelCapModal();
}
</syntaxhighlight>
If you wish to also increase combat level caps then the following can be used.
<syntaxhighlight lang="js">
let capType = 0; // 0 = pre-Bane, 2 = TotH, 4 = ItA
let capIncrease = game.currentGamemode.levelCapIncreases[capType];
game.increaseSkillLevelCaps(capIncrease, capIncrease.requirementSets.get(0));
</syntaxhighlight>
{{Menu}}

Latest revision as of 22:27, 26 October 2024

In-game functions are responsible for most things in the game. It is possible to interact directly with them through the console. This can be used to add items, levels, GP and more. These functions can be executed though the console. To access the console open Developer Tools (usually by pressing F12) in your browser and navigate to the console. Then, simply paste the code in the input field and press enter. Most functions will require you to fill out variables in the code before executing them. Note that all code is case sensitive.

Disclaimer: Blindly adding items and experience will most likely take away game enjoyment. It is highly encouraged only to use this to either test things or recoup lost items/progress due to lost saves.

You are playing around with the code of the game, as such if you make mistakes it is possible that could corrupt your game. It is highly recommended to BACKUP YOUR SAVE before running any in-game functions.

Using In-game Functions

Players can use the dev.Console mod to execute these functions within the Steam, Epic, Android, and iOS versions of Melvor Idle.

On Web, Steam, and Epic, the console can be opened with F12. If using Steam or Epic, you must enable the dev console first before you are able to open it.

Add Item to Bank

The addItemByID function can be used to add any item in the game to the bank. 

game.bank.addItemByID(itemID, quantity, logLost, found, ignoreSpace, notify)

Attributes

Attribute Type Optional? Default Value Description
itemID string No The ID of the item.

For a complete list of items, see: Table of Items. Item IDs are on their respective wiki page.

To search for a specific item by name, the following can be used. Replace REPLACEME with the full or partial name of the item (case insensitive). 

let searchTerm = 'REPLACEME';
console.log(game.items.filter(x => x.name.toLowerCase().includes(searchTerm.toLowerCase())).map((a) => a.id + ' - ' + a.name).join('\n'))
quantity int No Quantity of item to add.
logLost boolean Yes false If true, items that did not fit into the bank will be logged as lost
found boolean Yes false Determines if items added by this function will be included within the "Times Found" statistic for that item within the completion log. Therefore, unless this parameter is set to true, any items added in this way will not contribute towards the player's item completion percentage.

Note: When adding Bank Slot Tokens, it is suggested that this parameter is set to true, otherwise this may cause issues with the way the game calculates the amount of bank space a player has.
ignoreSpace boolean Yes false If true, the item will be added to the bank even if the bank is already full
notify boolean Yes true If true, there will be a notification that the item was added along with the quantity.

Examples

game.bank.addItemByID("melvorD:Oak_Logs", 10, true, true, false);

The above code will result in attempting to add 10 Oak Logs to the Bank. If they do not fit, 10 will be added to the # of Oak Logs lost on the item's stats. Additionally, Oak Logs will be marked as discovered in the Completion Log. 

game.items.forEach((item) => game.bank.addItem(item, 1000000, false, true, true, false));

The above code will add 1,000,000 of every item in the game. The items will be forced into the bank even if you do not have room and there will be no notifications upon adding the items.

Remove Item from Bank

The removeItemQuantityByID function can be used to remove any item from the bank 

game.bank.removeItemQuantityByID(itemID, quantity, removeItemCharges)

Note that if an item's quantity is in an invalid state, such as NaN or Infinity, then this function will not be able to remove that item from the bank. For any such items, use the below snippet instead:

Code
First, enter the below into the console: 
function removeItemByID(itemID) {
	const item = game.items.getObjectSafe(itemID);
	const bankItem = game.bank.items.get(item);
	if (bankItem === undefined)
	throw new Error(
	`Tried to remove quantity from bank, but item is not in bank.`
	);
	bankItem.quantity = 1;
	game.bank.removeItemQuantity(item, 1, true);
}

After this, invoke the newly-created function with the appropriate item ID to remove items from the bank. For example: removeItemByID('melvorD:Oak_Logs');

Attributes

Attribute Type Optional? Default Value Description
itemID string No The ID of the item.
For a complete list of items and their IDs, see: Table of Items
quantity int No The number of items to remove.
removeItemCharges boolean Yes true If true, the count of glove charges will be set to 0 if the itemID is for a pair of gloves with charges.

Examples

game.bank.removeItemQuantityByID('melvorD:Oak_Logs', 10);

The above code will result in 10 Oak Logs being removed from the bank.

Adjust Shop Purchases

The below script will add a shop purchase into upgradesPurchased which is where all purchases are stored. Alternatively, game.shop.buyItemOnClick(purchase, true); can be used however using this function will remove the costs of the purchase as well.

Attributes

Attribute Type Optional? Description
purchaseID string No The ID of the Purchase. A complete list of purchase IDs can be generated with: console.log(game.shop.purchases.allObjects.map((a) => a.id + ' - ' + a.name).join('\n'))

To search for a specific purchase by name, the following can be used. Replace REPLACEME with the full or partial name of the purchase (case insensitive). 

let searchTerm = 'REPLACEME';
console.log(game.shop.purchases.filter(x => x.name.toLowerCase().includes(searchTerm.toLowerCase())).map((a) => a.id + ' - ' + a.name).join('\n'))
quantity int No The number of purchases to buy

Examples

// Settings //
let purchase = game.shop.purchases.getObjectSafe('melvorD:Extra_Bank_Slot');
let quantity = 100;
// End of Settings //
game.shop.upgradesPurchased.set(purchase, (game.shop.upgradesPurchased.get(purchase) || 0) + quantity);
game.shop.computeProvidedStats();
shopMenu.tabs.get(purchase.category).menu.updateItemSelection();
game.shop.renderQueue.costs = true;

The above will add 100 Bank Slot purchases then do the necessary render.

Adjust Currencies

All Currencies within the game, being GP GP, AP Abyssal Pieces (AP), SC Slayer Coins (SC), ASC Abyssal Slayer Coins (ASC), and RC Raid Coins (RC) can be adjusted using the same set of functions:

  • To adjust GP, use game.gp
  • To adjust AP, use game.abyssalPieces
  • To adjust SC, use game.slayerCoins
  • To adjust ASC, use game.abyssalSlayerCoins
  • To adjust RC, use game.raidCoins

The following functions are used to add, remove, and set currencies. set may be of particular use to players who have inadvertently found their currency balance is set to an invalid value such as NaN. 

game.<currency>.add(amount);
game.<currency>.remove(amount);
game.<currency>.set(amount);

Attributes

Attribute Type Optional? Description
amount int No The amount to adjust the specified currency's balance by

Examples

game.gp.add(1000);
game.abyssalSlayerCoins.remove(2500);
game.raidCoins.set(10000);

The first function will add 1,000GP, the second function will remove 2,500ASC and lastly, the third function will set the balance of RC Raid Coins to 10,000.

Adjust Prayer Points or Soul Points

The addPrayerPoints and addSoulPoints functions can be used to add prayer points or soul points to a player. 

 game.combat.player.addPrayerPoints(amount);
 game.combat.player.addSoulPoints(amount);

Attributes

Attribute Type Optional? Description
amount int No The quantity of prayer or soul points to add. A negative value will remove points.

Examples

 game.combat.player.addPrayerPoints(1);
 game.combat.player.addSoulPoints(-50);

The first line will add 1 prayer point to the player while the second will remove 50 soul points.

Adjust XP and Abyssal XP

The addXP and addAbyssalXP functions can be used to add or remove experience and abyssal experience from any skill. The setXP and setAbyssalXP can be used to set the new experience or abyssal experience value. 

game.<skill>.addXP(xp);
game.<skill>.addAbyssalXP(xp);
game.<skill>.setXP(xp);
game.<skill>.setAbyssalXP(xp);

where <skill> is the lowercase name of the skill you are adding experience to.

Attributes

Attribute Type Optional? Description
xp int No Amount of experience to add. A negative number will remove experience. When removing XP, it's best to use the Set function as these will also visually update your current level if the removed experience results in a lower level.

Examples

game.thieving.addXP(1000);
game.astrology.setAbyssalXP(game.astrology.abyssalXP - 700); // For XP, use game.astrology.xp with the addXP function
game.attack.setXP(exp.levelToXP(120) + 1); // For Abyssal XP, use abyssalExp.levelToXP with the setAbyssalXP function

The first line will result in 1,000 experience being added to

Error creating thumbnail: File missing
Thieving

. The second line will remove 700 abyssal xp from Astrology. The third line will set Attack's level to 120.

Adjust Mastery XP

The addMasteryXP function can be used to add experience to any specific

Error creating thumbnail: File missing
Mastery

in a skill. 

game.<skill>.addMasteryXP(masteryAction, xp)

where <skill> is the lowercase name of the skill you are adding mastery experience to.

Attributes

Attribute Type Optional? Description
masteryAction object No The action to add Mastery XP to. Obtained with game.<skill>.actions.getObjectSafe(id);.

A list of actions IDs can be generated with console.log(game.<skill>.actions.allObjects.map((a) => a.id + ' - ' + a.name).join('\n'));

In both of the provided functions, <skill> must be replaced with the name of the skill (all lowercase).

xp int Yes Amount of experience to add. A negative value will remove mastery xp.

Examples

 game.farming.addMasteryXP(game.farming.actions.getObjectSafe('melvorD:Carrot'), 300);
 game.farming.addMasteryXP(game.farming.actions.getObjectSafe('melvorTotH:Starfruit'), -500);

The first line will result in 300

Error creating thumbnail: File missing
Mastery

XP being added to

Error creating thumbnail: File missing
Farming

for Carrot Seeds whereas the second line will remove 500 Mastery XP from Starfruit. 

game.masterySkills.forEach(skill => skill.actions.forEach(action => skill.addMasteryXP(action, 5000)));

The above code will result in 5,000

Error creating thumbnail: File missing
Mastery

XP being added to every action within every skill with a mastery action.

Adjust Mastery Pool XP

The addMasteryPoolXP function can be used to add Mastery Pool experience to a skill 

game.<skill>.addMasteryPoolXP(realm, xp)

where <skill> is the lowercase name of the skill you are adding mastery experience to.

Attributes

Attribute Type Optional? Description
realm object No The realm to add the Mastery Pool XP to. Obtained with game.realms.getObjectSafe(realmID).

A list of realm IDs can be obtained by entering the following into the console: console.log(game.realms.allObjects.map((a) => a.id + ' - ' + a.name).join('\n')).

xp int Yes Amount of experience to add. A negative value will remove mastery pool xp.

Examples

 game.woodcutting.addMasteryPoolXP(game.realms.getObjectSafe('melvorD:Melvor'), 600);
 game.woodcutting.addMasteryPoolXP(game.realms.getObjectSafe('melvorItA:Abyssal'), -400);

The first line will result in 600 Mastery Pool XP being added to

Error creating thumbnail: File missing
Woodcutting

in the Melvor Realm whereas the second line will remove 400 mastery pool xp from Woodcutting in the abyssal realm. 

game.realms.forEach(realm => game.masterySkills.forEach(skill => skill.addMasteryPoolXP(realm, 1000)));

The above code will result in 1,000 Mastery Pool XP being added to all skills in every realm.

Unlock a Pet

The unlockPetByID function is used to unlock Pets. 

game.petManager.unlockPetByID(petID)

Attributes

Attribute Type Optional? Description
petID string No The ID of the pet, which can be found on the individual pet pages (such as
Error creating thumbnail: File missing
Ty for example) or by using the following function: console.log(game.pets.allObjects.map((a) => a.id + ' - ' + a.name).join('\n'))

Examples

 game.petManager.unlockPetByID('melvorD:CoolRock');
 game.petManager.unlocked.delete(game.pets.getObjectSafe('melvorD:CoolRock'));game.petManager.computeProvidedStats();

The first line will result in the unlocking of

Error creating thumbnail: File missing
Cool Rock

while the second line will remove the Cool Rock then reload the player's stats. 

game.pets.forEach(pet => game.petManager.unlockPet(pet));

The above code will unlock every single pet.

Discover Summoning Marks

The discoverMark function is used to discover Summoning Marks. 

game.summoning.discoverMark(mark)

Attributes

Attribute Type Optional? Description
mark object No The mark to discover. Obtained with game.summoning.actions.getObjectSafe(markID) where markID is the ID of the mark.

A list of mark IDs can be obtained by entering the following into the console: console.log(game.summoning.actions.allObjects.map((a) => a.id + ' - ' + a.name).join('\n')).

Examples

 game.summoning.discoverMark(game.summoning.actions.getObjectSafe('melvorF:Dragon'));
 game.summoning.marksUnlocked.delete(game.summoning.actions.getObjectSafe('melvorF:Dragon'));

The first line discovers a single mark for the

Error creating thumbnail: File missing
Dragon

familiar whereas the second line removes all marks from the Dragon. 

game.summoning.actions.forEach((mark) => {
	game.summoning.marksUnlocked.set(mark, (mark.realm.id === 'melvorD:Melvor') ? 61 : 31);
	game.summoning.renderQueue.markCount.add(mark);
	game.summoning.renderQueue.markState.add(mark);
});

The above code will set every single mark to level 61 if it's in the Melvor Realm and 31 if it's in the Abyssal Realm then update the mark count and mark states.

Locate an Ancient Relic

The locateAncientRelic function is used to locate Ancient Relics. 

game.<skill>.locateAncientRelic(relicSet, relic)

where <skill> is the lowercase name of the skill you wish to add a relic to.

Attributes

Attribute Type Optional? Description
relicSet object No The relicSet that the relic belongs to. Obtained with game.<skill>.ancientRelicSets.get(realm)

A list of realms IDs can be obtained by entering the following into the console: console.log(game.realms.allObjects.map((a) => a.id + ' - ' + a.name).join('\n')). To convert the realmID into a realm object, use game.realms.getObjectSafe(realmID).

relic object No The relic that you wish to add.

The relic can be obtained with relicSet.relicDrops[#].relic; where # is replaced with the relic number, starting from 0 for the first relic and ending with 4 for the 5th relic.

Examples

let realm = game.realms.getObjectSafe('melvorD:Melvor');
let relicSet = game.woodcutting.ancientRelicSets.get(realm);
let relic = relicSet.relicDrops[0].relic;
if (!relicSet.foundRelics.has(relic))
	game.woodcutting.locateAncientRelic(relicSet, relic);

The above code locates Woodcutting Relic 1 in the Melvor Realm. 

game.skills.forEach(skill => {
	game.realms.forEach(realm => {
		let relicSet = skill.ancientRelicSets.get(realm);
		if (skill.hasAncientRelics && relicSet !== undefined)
			relicSet.relicDrops.forEach(({ relic }) => {
				if (!relicSet.foundRelics.has(relic))
					skill.locateAncientRelic(relicSet, relic)
			});
	});
});

The above will add all the ancient relics to every skill, including modded skills, for all realms that have relics.

Reset all Equipment Quick Equip Items

The below script will reset the Equipment Quick Equip items back to an empty item. These are the Quick Equip items that are found when clicking on an equipment slot, not the ones found in the skilling minibar (that are set through the bank settings).

Examples

game.combat.player.equipment.equippedArray.forEach(equipped => {
	equipped.quickEquipItems = [game.emptyEquipmentItem, game.emptyEquipmentItem, game.emptyEquipmentItem];
	equipped.trimQuickEquipItems();
});

The above code will reset all the quick equip items for the current equipment set. 

game.combat.player.equipmentSets.forEach(({ equipment }) => {
	equipment.equippedArray.forEach(equipped => {
		equipped.quickEquipItems = [game.emptyEquipmentItem, game.emptyEquipmentItem, game.emptyEquipmentItem];
		equipped.trimQuickEquipItems();
	});
});

The above code will reset all the quick equip items for all equipment sets.

Adjust Dungeon Completions

The addDungeonCompletion and setDungeonCompleteCount functions are used to modify a dungeon's completion count. 

game.combat.player.manager.addDungeonCompletion(dungeon);
game.combat.player.manager.setDungeonCompleteCount(dungeon, amount);

Attributes

Attribute Type Optional? Description
dungeon object No The dungeon you wish to add a completion to. Obtained with game.dungeons.getObjectSafe(dungeonID); where dungeonID is the ID of the dungeon.

A list of dungeon IDs can be obtained by entering the following into the console: console.log(game.dungeons.allObjects.map((a) => a.id + ' - ' + a.name).join('\n')).

If an invalid dungeonID is entered, your game will be unable to be saved until the entry is either removed or the game is reloaded. You can remove the undefined entry with game.combat.player.manager.dungeonCompletion.delete(undefined) which should return true and the errors should stop appearing.

amount number No The amount of dungeons clears you wish to add when using setDungeonCompleteCount. An amount is only required for setDungeonCompleteCount.

Examples

 let dungeon = game.dungeons.getObjectSafe('melvorF:Into_the_Mist');
 game.combat.player.manager.addDungeonCompletion(dungeon);

 let dungeon = game.dungeons.getObjectSafe('melvorItA:Into_The_Abyss')
 game.combat.player.manager.setDungeonCompleteCount(dungeon, 15);

The first example will add a single completion to

Error creating thumbnail: File missing
Into the Mist

while the second example will set

Error creating thumbnail: File missing
Into the Abyss

completions to 15.

After modifying the dungeon completion count, run game.queueRequirementRenders(); to apply UI updates without having to restart the game.

Ancient Relics Level Caps

Increasing or Setting level caps

The increaseLevelCap and setLevelCap functions are used to modify the current level cap of a given skill in the Ancient Relics gamemode. 

 game.<skill>.increaseLevelCap(value);
 game.<skill>.setLevelCap(value);
 game.<skill>.increaseAbyssalLevelCap(value);
 game.<skill>.setAbyssalLevelCap(value);

Attributes

Attribute Type Optional? Description
value int No The value to increase the level cap by, or set the level cap to

Examples

 game.slayer.increaseLevelCap(20);
 game.thieving.setAbyssalLevelCap(45);

The first line will increase

Error creating thumbnail: File missing
Slayer's

level cap by 20 levels whereas the second line will set

Error creating thumbnail: File missing
Thieving

level cap to 45. 

 game.skills.forEach(skill => {
	 skill.setLevelCap(skill.maxLevelCap);
	 if (skill.hasAbyssalLevels)
		 skill.setAbyssalLevelCap(skill.maxAbyssalLevelCap);
 });

The above code will set both the level caps and abyssal level caps of all skills to their maximum value.

Awarding random level caps

The below script will award random level cap increases without increasing combat level caps. The only value that must be changed is the capType at the beginning of the script. 0 is a pre-Bane level cap increase, 2 is a TotH level cap increase, and 4 is an ItA level cap increase. 

let capType = 0; // 0 = pre-Bane, 2 = TotH, 4 = ItA
let capIncrease = game.currentGamemode.levelCapIncreases[capType];
game.validateRandomLevelCapIncreases();
if (capIncrease.randomIncreases.length > 0 && capIncrease.randomCount > 0) {
	if (capIncrease.randomIncreasesLeft === 0)
		game.levelCapIncreasesBeingSelected.push(capIncrease);
	capIncrease.randomIncreasesLeft += capIncrease.randomCount;
	game.renderQueue.sidebarSkillUnlock = true;
	game.queueNextRandomLevelCapModal();
}

If you wish to also increase combat level caps then the following can be used. 

let capType = 0; // 0 = pre-Bane, 2 = TotH, 4 = ItA
let capIncrease = game.currentGamemode.levelCapIncreases[capType];
game.increaseSkillLevelCaps(capIncrease, capIncrease.requirementSets.get(0));


Melvor Idle version v1.3.1 (Released: 30th October 2024)
Error creating thumbnail: File missing
Combat:
Error creating thumbnail: File missing
Attack •
Error creating thumbnail: File missing
Strength •
Error creating thumbnail: File missing
Defence •
Error creating thumbnail: File missing
Hitpoints •
Error creating thumbnail: File missing
Ranged •
Error creating thumbnail: File missing
Magic •
Error creating thumbnail: File missing
Prayer •
Error creating thumbnail: File missing
Slayer •
Error creating thumbnail: File missing
Corruption
Skills:
Error creating thumbnail: File missing
Farming •
Error creating thumbnail: File missing
Township •
Error creating thumbnail: File missing
Woodcutting •
Error creating thumbnail: File missing
Fishing •
Error creating thumbnail: File missing
Firemaking •
Error creating thumbnail: File missing
Cooking •
Error creating thumbnail: File missing
Mining •
Error creating thumbnail: File missing
Smithing •
Error creating thumbnail: File missing
Thieving •
Error creating thumbnail: File missing
Fletching •
Error creating thumbnail: File missing
Crafting •
Error creating thumbnail: File missing
Runecrafting •
Error creating thumbnail: File missing
Herblore •
Error creating thumbnail: File missing
Agility •
Error creating thumbnail: File missing
Summoning •
Error creating thumbnail: File missing
Astrology •
Error creating thumbnail: File missing
Alternative Magic •
Error creating thumbnail: File missing
Cartography •
Error creating thumbnail: File missing
Archaeology •
Error creating thumbnail: File missing
Harvesting
Other:
Error creating thumbnail: File missing
Beginners Guide • Guides •
Error creating thumbnail: File missing
Bank •
Error creating thumbnail: File missing
Combat •
Error creating thumbnail: File missing
Mastery •
Error creating thumbnail: File missing
Money Making •
Error creating thumbnail: File missing
Shop • Easter Eggs • Pets •
Error creating thumbnail: File missing
Golbin Raid •
Error creating thumbnail: File missing
Full Version • Throne of the Herald • Atlas of Discovery •
Error creating thumbnail: File missing
Into the Abyss
Reference Tables: Items, Equipment, Experience Table, Upgrading Items, Combat Areas, Slayer Areas, Dungeons, Strongholds, The Abyss, Monsters
Retrieved from "https://testwiki.melvoridle.com/index.php?title=In-game_Functions&oldid=83364"