In-game Functions

From Melvor Idle
Revision as of 00:03, 10 February 2022 by Auron956 (talk | contribs) (Update for 1.0.2)
This page was last updated for (v1.0.2).

In-game functions are responsible for most things in the game. It is possible to interact directly with them through the console. This can be used to add items, levels, GP and more. These functions can be executed though the console. To access the console open Developer Tools (usually by pressing F12) in your browser and navigate to the console. Then, simply paste the code in the input field and press enter. Most functions will require you to fill out variables in the code before executing them. Note that all code is case sensitive.

Disclaimer: Blindly adding items and experience will most likely take away game enjoyment. It is highly encouraged only to use this to either test things or recoup lost items/progress due to lost saves.

You are playing around with the code of the game if you make mistakes, it is possible that could corrupt your game. It is highly recommended to BACKUP YOUR SAVE before running any in-game functions.

Using In-game Functions On Steam

Players should refer to the Scripting and Extensions Instructions page for a step-by-step guide on using these functions with the Steam version of Melvor Idle.

addItemToBank

The addItemToBank function can be used to add any item in the game to the bank.

addItemToBank(itemID, quantity, found, showNotification, ignoreBankSpace)

Attributes

Attribute Type Optional? Default Value Description
itemID int No The ID of the item.
For a complete list of items and their IDs, see: Table of Items
quantity int No Quantity of item to add. Will remove items from the bank if a negative value is specified
found boolean Yes true Determines if it will show in item completion log
showNotification boolean Yes true Determines if it will show notification
ignoreBankSpace boolean Yes false If true, the item will be added to the bank even if the bank is already full

Examples

addItemToBank(1, 10, false);

The above code will result in 10 items with item ID 1 (Oak Logs) being added to the Bank without them appearing in the item completion log, but with notification.

removeItemFromBank

The removeItemFromBank function can be used to remove any item from the bank

removeItemFromBank(itemID, deactiveGloves)

Attributes

Attribute Type Optional? Default Value Description
itemID int No The ID of the item.
For a complete list of items and their IDs, see: Table of Items
deactiveGloves boolean Yes true If true, the count of glove charges will be set to 0 if the itemID is for a pair of gloves with charges.

Examples

removeItemFromBank(1);

The above code will result in item ID 1 (Oak Logs) being removed from the bank.

player.addGP

The player.addGP function can be used to add GP to a player.

player.addGP(amount, source)

Attributes

Attribute Type Optional? Default Value Description
amount int No The quantity of GP to add
source string No The source of the GP being added. If set to "Combat" it will add the GP to the players "GP received in combat" stat for tracking.

Examples

player.addGP(1,"");

The above code will add 1 gp to the player, and not place the info into the players stats for tracking.

player.addGP(1,"Combat");

The above code will add 1 gp to the player, and place the info into the players stats for tracking.

player.removeGP

The player.removeGP function can be used to remove GP from a player. If the amount specified is greater than the amount the player currently has, then no GP will be removed.

player.removeGP(amount)

Attributes

Attribute Type Optional? Default Value Description
amount int No The quantity of GP to remove

Examples

player.removeGP(1);

The above code will remove 1 GP from the player.

player.addSlayerCoins

The player.addSlayerCoins function can be used to add slayer coins to a player.

player.addSlayerCoins(amount)

Attributes

Attribute Type Optional? Default Value Description
amount int No The quantity of slayer coins to add. This amount can be increased or decreased if the player is currently affected by any +/-% Slayer coins bonuses.

Examples

player.addSlayerCoins(1);

The above code will add 1 slayer coin to the player, and update player stats.

player.removeSlayerCoins

The player.removeSlayerCoins function can be used to remove slayer coins from a player. If the amount specified is greater than the amount the player currently has, then no slayer coins will be removed.

player.removeSlayerCoins(amount, render)

Attributes

Attribute Type Optional? Default Value Description
amount int No The quantity of slayer coins to remove
render boolean Yes true If true, spawns a notification showing the quantity of coins removed and immediately updates the UI

Examples

player.removeSlayerCoins(1);

The above code will remove 1 slayer coin from the player, and immediately update the UI.

updateRaidCoins

The updateRaidCoins function can be used to add or remove raid coins from a player.

updateRaidCoins(amount)

Attributes

Attribute Type Optional? Default Value Description
amount int Yes 0 The quantity of raid coins to be added. Coins can also be removed if a negative number is specified.

Examples

updateRaidCoins(1);

The above will add 1 raid coin to the player.

player.addPrayerPoints

The player.addPrayerPoints function can be used to add prayer points to a player.

player.addPrayerPoints(amount)

Attributes

Attribute Type Optional? Default Value Description
amount int No The quantity of prayer points to add.

Examples

player.addPrayerPoints(1);

The above code will add 1 prayer point to the player, and update player stats.

player.addXP

The player.addXP function can be used to add experience to any skill. Note that the game will not visually show the updated XP until after refresh or 1 new action.

player.addXP(skillID, xp)

Attributes

Attribute Type Optional? Default Value Description
skillID int No The ID of the skill, see: Skill ID
xp int No Amount of experience to add. Note that this is the amount of experience added before bonuses such as that from the Firemaking Skillcape or Pyro

Examples

player.addXP(10, 1000);

The above code will result in 1000 experience being added to the skill with ID 10 (Thieving).

addMasteryXP

The addMasteryXP function can be used to add experience to any specific Mastery in a skill. Note that the game will not visually show the updated Mastery experience until after refresh or 1 new action.

addMasteryXP(skillID, masteryID, timePerAction, spendingXP, xp, addToPool, offline)

Attributes

Attribute Type Optional? Default Value Description
skillID int No The ID of the skill, see: Skill ID
masteryID int No The skill specific Mastery ID. See below for information on how to identify Mastery ID values
timePerAction int No The interval (in milliseconds) of the action granting mastery experience. Has no effect on the result if spendingXP is true
spendingXP boolean Yes false true: The amount of experience specified with xp is added, timePerAction is ignored
false: The amount of experience added is determined by the Mastery experience per action calculation, xp is ignored
xp int Yes 0 Amount of experience to add. Has no effect on the result if spendingXP is false
addToPool boolean Yes true Determines whether a portion of the specified experience amount is added to the mastery pool for the relevant skill or not
offline boolean Yes false Determines if various UI elements are immediately updated to reflect the experience gain. Should usually be left as the default value

Mastery IDs

Below is a reference of how the various mastery ID values may be identified.

Skill Mastery ID
Error creating thumbnail: File missing
Woodcutting
Index of the required tree within the Trees enum
Error creating thumbnail: File missing
Thieving
Index of the required NPC within the ThievingNPCs enum
Error creating thumbnail: File missing
Agility
Index of the required obstacle within the AgilityObstacles enum
Error creating thumbnail: File missing
Astrology
Index of the required constellation within the ASTROLOGY constant
Error creating thumbnail: File missing
Farming
items[itemID].masteryID[1] replacing itemID with the ID of the planted seed
Error creating thumbnail: File missing
Fishing
items[itemID].masteryID[1], replacing itemID with the ID of the item produced by the action
Error creating thumbnail: File missing
Firemaking
Error creating thumbnail: File missing
Cooking
Error creating thumbnail: File missing
Mining
Error creating thumbnail: File missing
Smithing
Error creating thumbnail: File missing
Fletching
Error creating thumbnail: File missing
Crafting
Error creating thumbnail: File missing
Runecrafting
Error creating thumbnail: File missing
Herblore
Error creating thumbnail: File missing
Summoning

Examples

addMasteryXP(11, 13, 0, true, 300);

The above code will result in 300 Mastery XP being added to the skill with ID 11 (Farming) for Mastery ID 13 (Carrot Seeds).

addMasteryXP(2, 3, 3000);

The above code will result in the calculation & addition of the amount of Mastery XP from an action in skill with ID 2 (Firemaking) for item with Mastery ID 3 (Teak Logs), supposing the action took 3,000 milliseconds.

addMasteryXPToPool

The addMasteryXpToPool function can be used to add mastery pool experience to a skill

addMasteryXPToPool(skillID, xp, offline, token)

Attributes

Attribute Type Optional? Default Value Description
skillID int No The ID of the skill, see: Skill ID
xp int Yes 0 Amount of experience to add. One quarter of this value will be added if the player is under level 99 in that skill. One half of the value will be added if the player is level 99 in that skill.
offline boolean Yes false Determines if various UI elements are immediately updated to reflect the experience gain. Should usually be left as the default value
token boolean Yes false Forces forces 100% of the xp value to be added to the pool, ignoring player's level within the skill.

Examples

addMasteryXPToPool(11, 600);

The above code will result in 150 Mastery Pool XP being added to the skill with ID 11 (Farming) if the player is under 99 in farming. Or 300 Mastery Pool XP being added if the player is over 99

unlockPet

The unlockPet function is used to unlock Pets. Note that unlocking a pet is permanent - there is no supported method to lock a pet once again.

unlockPet(petID, offline)

Attributes

Attribute Type Optional? Default Value Description
petID int No The ID of the pet, which can be found on the individual pet pages (such as
Error creating thumbnail: File missing
Ty
for example).
offline boolean Yes false Determines if various UI elements are immediately updated to reflect the experience gain. Should usually be left as the default value

Examples

unlockPet(4);

The above code will result in the unlocking of

Error creating thumbnail: File missing
Cool Rock

.

Reference Tables

Skill ID

ID Skill
0
Error creating thumbnail: File missing
Woodcutting
1
Error creating thumbnail: File missing
Fishing
2
Error creating thumbnail: File missing
Firemaking
3
Error creating thumbnail: File missing
Cooking
4
Error creating thumbnail: File missing
Mining
5
Error creating thumbnail: File missing
Smithing
6
Error creating thumbnail: File missing
Attack
7
Error creating thumbnail: File missing
Strength
8
Error creating thumbnail: File missing
Defence
9
Error creating thumbnail: File missing
Hitpoints
10
Error creating thumbnail: File missing
Thieving
11
Error creating thumbnail: File missing
Farming
12
Error creating thumbnail: File missing
Ranged
13
Error creating thumbnail: File missing
Fletching
14
Error creating thumbnail: File missing
Crafting
15
Error creating thumbnail: File missing
Runecrafting
16
Error creating thumbnail: File missing
Magic
17
Error creating thumbnail: File missing
Prayer
18
Error creating thumbnail: File missing
Slayer
19
Error creating thumbnail: File missing
Herblore
20
Error creating thumbnail: File missing
Agility
21
Error creating thumbnail: File missing
Summoning
22
Error creating thumbnail: File missing
Astrology