In-game Functions

In-game functions are responsible for most things in the game. It is possible to interact directly with them through the console. This can be used to add items, levels, GP and more. These functions can be executed though the console. To access the console open Developer Tools (usually by pressing F12) in your browser and navigate to the console. Then, simply paste the code in the input field and press enter. Most functions will require you to fill out variables in the code before executing them. Note that all code is case sensitive.

Disclaimer: Blindly adding items and experience will most likely take away game enjoyment. It is highly encouraged only to use this to either test things or recoup lost items/progress due to lost saves.

Disclaimer: You are playing around with the code of the game if you make mistakes, it is possible that could corrupt your game. It is highly recommended to BACKUP YOUR SAVE before running any in-game functions.

Using In-game Functions On Steam

Players should refer to the Scirpting and Extensions Instructions page for a step-by-step guide on using these functions with the Steam version of Melvor Idle.

addItemToBank

The addItemToBank function can be used to add any item in the game to the bank.

addItemToBank(itemID, quantity, found, showNotification, ignoreBankSpace)

Attributes

Attribute	Type	Optional?	Default Value	Description
itemID	int	No		The ID of the item. For a complete list of items and their IDs, see: Table of Items
quantity	int	No		Quantity of item to add. Will remove items from the bank if a negative value is specified
found	boolean	Yes	true	Determines if it will show in item completion log
showNotification	boolean	Yes	true	Determines if it will show notification
ignoreBankSpace	boolean	Yes	false	If `true`, the item will be added to the bank even if the bank is already full

Examples

addItemToBank(1, 10, false);

The above code will result in 10 items with item ID 1 (Oak Logs) being added to the Bank without them appearing in the item completion log, but with notification.

removeItemFromBank

The removeItemFromBank function can be used to remove any item from the bank

removeItemFromBank(itemID, deactiveGloves)

Attributes

Attribute	Type	Optional?	Default Value	Description
itemID	int	No		The ID of the item. For a complete list of items and their IDs, see: Table of Items
deactiveGloves	boolean	Yes	true	If `true`, the count of glove charges will be set to 0 if the itemID is for a gloves with charges.

Examples

removeItemFromBank(1);

The above code will result in item ID 1 (Oak Logs) being removed from the bank.

player.addGP

The player.addGP function can be used to add gp to a player.

player.addGP(amount, source)

Attributes

Attribute	Type	Optional?	Default Value	Description
amount	int	No		The quantity of GP to add
source	string	No		The source of the GP being added. If set to "Combat" it will add the gp to the players gp received in combat stat for tracking.

Examples

player.addGP(1,"");

The above code will add 1 gp to the player, and not place the info into the players stats for tracking.

player.addGP(1,"Combat");

The above code will add 1 gp to the player, and place the info into the players stats for tracking.

player.removeGP

The player.removeGP function can be used to remove gp from a player.

player.removeGP(amount)

Attributes

Attribute	Type	Optional?	Default Value	Description
amount	int	No		The quantity of GP to remove

Examples

player.removeGP(1);

The above code will remove 1 gp from the player.

player.addPrayerPoints

The player.addPrayerPoints function can be used to add prayer points to a player.

player.addPrayerPoints(amount)

Attributes

Attribute	Type	Optional?	Default Value	Description
amount	int	No		The quantity of prayer points to add.

Examples

player.addPrayerPoints(1);

The above code will add 1 prayer point to the player, and update player stats.

player.addSlayerCoins

The player.addSlayerCoins function can be used to add slayer coins to a player.

player.addSlayerCoins(amount)

Attributes

Attribute	Type	Optional?	Default Value	Description
amount	int	No		The quantity of slayer coins to add.

Examples

player.addSlayerCoins(1);

The above code will add 1 slayer coin to the player, and update player stats.

player.addXP

The player.addXP function can be used to add experience to any skill. Note that the game will not visually show the updated XP until after refresh or 1 new action.

player.addXP(skillID, xp)

Attributes

Attribute	Type	Optional?	Default Value	Description
skillID	int	No		The ID of the skill, see: Skill ID
xp	int	No		Amount of experience to add. Note that this is the amount of experience added before bonuses such as that from the Firemaking Skillcape or Pyro

Examples

player.addXP(10, 1000);

The above code will result in 1000 experience being added to the skill with ID 10 (Thieving).

addMasteryXP

The addMasteryXP function can be used to add experience to any specific Mastery in a skill. Note that the game will not visually show the updated Masterry experience until after refresh or 1 new action.

addMasteryXP(skillID, masteryID, timePerAction, spendingXP, xp, addToPool, offline)

Attributes

Attribute	Type	Optional?	Default Value	Description
skillID	int	No		The ID of the skill, see: Skill ID
masteryID	int	No		The skill specific Mastery ID. See below for information on how to identify Mastery ID values
timePerAction	int	No		The interval (in milliseconds) of the action granting mastery experience. Has no effect on the result if `spendingXP` is `true`
spendingXP	boolean	Yes	false	`true`: The amount of experience specified with `xp` is added, `timePerAction` is ignored `false`: The amount of experience added is determined by the Mastery experience per action calculation, `xp` is ignored
xp	int	Yes	0	Amount of experience to add. Has no effect on the result if `spendingXP` is `false`
addToPool	boolean	Yes	true	Determines whether a portion of the specified experience amount is added to the mastery pool for the relevant skill or not
offline	boolean	Yes	false	Determines if various UI elements are immediately updated to reflect the experience gain. Should usually be left as the default value

Mastery IDs

Below is a reference of how the various mastery ID values may be identified.

Skill	Mastery ID
Error creating thumbnail: File missing Woodcutting	Index of the required tree within the constant `trees`
Error creating thumbnail: File missing Thieving	Index of the required NPC within the constant `thievingNPC`
Error creating thumbnail: File missing Farming	`items[itemID].masteryID[1]` replacing `itemID` with the ID of the planted seed
Error creating thumbnail: File missing Fishing	`items[itemID].masteryID[1]`, replacing `itemID` with the ID of the item produced by the action
Error creating thumbnail: File missing Firemaking
Error creating thumbnail: File missing Cooking
Error creating thumbnail: File missing Mining
Error creating thumbnail: File missing Smithing
Error creating thumbnail: File missing Fletching
Error creating thumbnail: File missing Crafting
Error creating thumbnail: File missing Runecrafting
Error creating thumbnail: File missing Herblore

Examples

addMasteryXP(11, 13, 0, true, 300);

The above code will result in 300 Mastery XP being added to the skill with ID 11 (Farming) for Mastery ID 13 (Carrot Seeds).

addMasteryXP(2, 3, 3000);

The above code will result in the calculation & addition of the amount of Mastery XP from an action in skill with ID 2 (Firemaking) for item with Mastery ID 3 (Teak Logs), supposing the action took 3,000 milliseconds.

addMasteryXpToPool

The addMasteryXpToPool function can be used to add mastery pool experience to a skill

addMasteryXPToPool(skillID, xp, offline, token)

Attributes

Attribute	Type	Optional?	Default Value	Description
skillID	int	No		The ID of the skill, see: Skill ID
xp	int	Yes	0	Amount of experience to add. One quarter of this value will be added if the player is under level 99 in that skill. One half of the value will be added if the player is level 99 in that skill.
offline	boolean	Yes	false	Determines if various UI elements are immediately updated to reflect the experience gain. Should usually be left as the default value
token	boolean	Yes	false	Forces forces 100% of the `xp` value to be added to the pool, ignoring player's level within the skill.

Examples

addMasteryXpToPool(11, 600);

The above code will result in 150 Mastery Pool XP being added to the skill with ID 11 (Farming) if the player is under 99 in farming. Or 300 Mastery Pool XP being added if the player is over 99

Reference Tables

Skill ID

ID	Skill
0	Error creating thumbnail: File missing Woodcutting
1	Error creating thumbnail: File missing Fishing
2	Error creating thumbnail: File missing Firemaking
3	Error creating thumbnail: File missing Cooking
4	Error creating thumbnail: File missing Mining
5	Error creating thumbnail: File missing Smithing
6	Error creating thumbnail: File missing Attack
7	Error creating thumbnail: File missing Strength
8	Error creating thumbnail: File missing Defence
9	Error creating thumbnail: File missing Hitpoints
10	Error creating thumbnail: File missing Thieving
11	Error creating thumbnail: File missing Farming
12	Error creating thumbnail: File missing Ranged
13	Error creating thumbnail: File missing Fletching
14	Error creating thumbnail: File missing Crafting
15	Error creating thumbnail: File missing Runecrafting
16	Error creating thumbnail: File missing Magic
17	Error creating thumbnail: File missing Prayer
18	Error creating thumbnail: File missing Slayer
19	Error creating thumbnail: File missing Herblore
20	Error creating thumbnail: File missing Agility
21	Error creating thumbnail: File missing Summoning
22	Error creating thumbnail: File missing Astrology